More Insights
Eurotech International is a family-owned precision metal fabrication company in Melbourne, delivering laser cutting, welding, machining, forming and finishing under one roof for over 40 years — trusted across defence, infrastructure, mining and industry.
Our Services
Nine core capabilities under one roof — from cutting and forming to welding, machining and finishing. We work in mild and galvanised steel, stainless, aluminium, copper/brass, chromoly and titanium. Figures are typical envelopes, confirmed at quoting.
Industries We Serve
Our Clients
Testimonials
Live from our Google Business Profile — see all our reviews on Google.
FAQs
We regularly fabricate in mild steel, galvanised steel, stainless steel, aluminium, copper, brass, chromoly and titanium. For a less common alloy or specific grade, contact us — we can source materials with full mill certification and traceability to support your compliance requirements.
Our quality management system is aligned to ISO 9001 principles, but we are not currently third-party certified. We issue certificates of conformance, provide full material traceability on request, and have access to NATA-accredited third-party inspection for dimensional verification.
Yes. We work with clients at every stage — from a single prototype or first article through to ongoing production programs and contract supply. Our in-house CAD/CAM capability means the same controls used for your prototype carry through to volume production.
Our laser cutting capacity covers sheet up to 4.0 × 2.0 m. Indicative maximum thickness is approximately 40 mm across mild steel, stainless steel and aluminium. Tube and box section cutting is available to approximately Ø300 mm and 8.5 m length — confirmed at quoting.
Yes. We are members of the Australian Industry & Defence Network (AIDN) and the Industry Capability Network (ICN), and we can provide certificates of conformance, material traceability, FAIR support and documented welding procedures. Contact us to discuss your compliance requirements before quoting.
We're at Factory 12, 125–131 Chesterville Rd, Highett VIC 3190 — in Melbourne's south-east, close to Moorabbin, Cheltenham and Mentone. We supply clients across Melbourne and Victoria as our primary market, and regularly supply Australian industry nationally. Office hours are Monday to Friday, 9:00 am to 4:00 pm.
Turnaround
Indicative timeframes only — confirmed at quoting and dependent on scope, materials and volume. Rush jobs available on request.
Ready to move from drawings to parts? Send a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteCompany
A trusted Australian manufacturing partner in Highett, VIC, backed by five generations of metalworking heritage.
About Eurotech
Eurotech International is a family-owned precision metal fabrication company based in Highett, Melbourne. For more than 40 years we have delivered high-quality fabricated metal products, precision weldments, engineered assemblies and complete manufacturing solutions to Australian industry — backed by five generations of metalworking heritage. Our experience spans defence, infrastructure, mining, rail, energy, utilities, transportation and advanced manufacturing, supporting projects from prototype development through to production manufacturing and long-term sustainment.
We are easy to work with, communicate openly, and deliver to tight tolerances, with full material traceability available on request. Customers require more than capability alone — they need confidence that their supplier has the experience, resources and stability to support critical programs for years. We continue to invest in our people, facilities and technologies to remain a trusted partner for Australia's future.
Why Eurotech
Eurotech International delivers integrated precision metal fabrication and engineering solutions for defence, government and major industry across Melbourne and Australia. With more than 40 years' experience, we combine technical expertise, precision manufacturing and trusted engineering partnerships to deliver reliable, high-quality outcomes for complex, mission-critical projects.
Over four decades delivering complex, high-value metal fabrication and engineering projects for defence, government and major industry.
A proven track record of quality outcomes delivered safely, on time and to specification — with consistency, professionalism and accountability.
Quality is embedded in everything we do — every part made to rigorous technical, regulatory and operational standards for long-term value.
Enduring relationships built on integrity, transparency, confidentiality and accountability — sensitive projects handled with discretion.
Multidisciplinary expertise across the project lifecycle — from design support and CAD/CAM through to precision metal fabrication, finishing and assembly, backed by certified engineering via trusted partners.
Four decades of delivery have shaped robust processes, practical decision-making and continuous improvement that reduce risk and improve efficiency.
Practical, forward-thinking fabrication and engineering solutions that improve performance, reliability and long-term asset value.
Testimonials
Live from our Google Business Profile — see all our reviews on Google.
Downloads
Download our latest company documents to share with your team, include in tenders or keep on file.
An overview of Eurotech — our story, the industries we serve and a showcase of representative projects and finishes. Available on request — tell us where to send it and a member of our team will be in touch.
Our full manufacturing capabilities, equipment, materials, certifications and quality processes on a single document.
Download capability statementQuality & Compliance
Quality is fundamental to every aspect of our business. Our ISO 9001-aligned quality management system (non-certified) ensures consistent product performance, process control and complete traceability throughout the manufacturing lifecycle.
Quality & Traceability
Our quality management system supports complete process control and traceability — from material certificates through to full manufacturing documentation packages.
Governance & Compliance
Eurotech operates with a firm commitment to responsible manufacturing, regulatory compliance and ethical business conduct. Formal policies govern quality, safety, environment, information security and ethical supply-chain practice, available on request.
For major government projects, Eurotech can engage specialist government lawyers — such as Maddocks and Minter Ellison — to scrutinise each contract and advise on procurement and contracting matters, ensuring full alignment with the terms prior to contract execution.
Structured systems aligned with ISO 9001 support process control, inspection discipline and continuous improvement.
A zero-tolerance approach to bribery and corruption, with ethical supply chains under the Modern Slavery Act 2018 (Cth).
Clear procedures, risk assessments and workforce training support safe operations across all activities.
Manufacturing complies with applicable environmental regulations, with a focus on responsible resource management.
Procedures protect commercially sensitive and defence-related information.
Operations comply with Australian trade and export-control regulations for defence and industrial supply chains.
Controls prevent the introduction of counterfeit or non-conforming materials.
Engineering Partners
Through decades of successful delivery, Eurotech has established long-standing relationships with trusted Australian manufacturers, specialist processors, engineering firms and material suppliers. Collaborative manufacturing agreements with selected partners allow us to draw on certified engineering, specialised resources, technical expertise and production capability where required — so customers gain the responsiveness of a dedicated manufacturing partner combined with the capacity and flexibility of a broader manufacturing network.
We work alongside certified engineering firms that provide independent design, testing, verification and certification across multiple disciplines.
Formal policies governing quality, safety, environment, information security and ethical supply-chain practice are available on request.
Discuss your quality requirementsIndustry
A sovereign, Australian-owned precision metal fabrication partner for defence, government and critical infrastructure programs — with full material traceability and documented quality on every job.
Overview
Eurotech International supplies precision fabricated components, weldments and assemblies to Defence primes, the Department of Defence and the Defence Science and Technology Group (DSTG), government agencies and critical infrastructure programs across Melbourne, Victoria and Australia. For more than 40 years we have delivered work where documentation, traceability and supplier stability matter as much as the part itself.
As an Australian-owned, family-run manufacturer, we offer sovereign capability with a documented chain of custody from certified raw material through to finished, inspected product — backed by certified engineering through our trusted partner network.
Heritage
Eurotech International has proudly supported Australia's Defence industry for more than four decades, delivering precision-engineered components, fabricated assemblies and specialised metal fabrication solutions for some of the nation's most significant Defence programs.
Our experience spans a broad range of Defence projects, including the manufacture of fabricated assemblies for the Bushmaster Protected Mobility Vehicle and numerous other Defence initiatives. Throughout periods of heightened operational demand — including the conflicts in Iraq and Afghanistan — Eurotech assisted the Army and Defence partners in meeting critical production schedules and demanding delivery deadlines, helping ensure Australian Defence capability when it mattered most.
Eurotech is continually working with the Department of Defence, DSTG, Defence primes and specialist industry partners on current projects, providing high-quality manufacturing solutions that meet the exacting standards required for mission-critical applications.
Our Defence Story
In 1994 I stood at Williamstown Dockyard in Melbourne to witness the launch of HMAS Anzac (FFH 150), the first ANZAC Class Frigate built for the Royal Australian Navy. My late father’s business contributed precision-engineered components through a specialist manufacturer supporting the Tenix Defence program — a small part of an immensely complex undertaking, and an early lesson that no contribution is insignificant when it forms part of something greater than ourselves.
As the frigate slipped into the water, I saw what Australia achieves when it sets an ambitious vision and unites industry, government, Defence and thousands of skilled people — Australians alongside New Zealand partners and international designers and suppliers — behind a single objective. Breakthroughs of that scale never come from incremental improvement; they come from bold aspirations pursued with discipline and courage. The program delivered ten world-class frigates, eight of them for Australia — proof that strength lies not in technology, but in the ingenuity and determination of the people who build it. I left Williamstown proud of my father’s contribution, and prouder still of what had been achieved here in Australia.
Three decades on, that day still shapes how I lead Eurotech International. Innovation is never the work of one individual or organisation; it is created through collaboration and a shared commitment to excellence that turns ideas into practical solutions for industry, Defence and Australia. Genuine leadership is measured not by personal achievement, but by the ability to bring people together to accomplish something that endures.
Track Record
Government & Public Sector
Beyond defence, Eurotech International supplies local councils, state and federal government agencies, and public-sector contractors across Australia. From public infrastructure and transport to utilities and community spaces, we deliver precision metal fabrication with the documentation government procurement expects — Australian-owned manufacturing, tender-ready responses, certificates of conformance and full traceability on request.
Councils across Australia also choose our own smart city infrastructure — Australian-designed and fabricated at our Highett facility — led by our Smart Solar Bins, the first node in the Eurotech smart city platform.
Why Eurotech
Our Commitment
Defence manufacturing demands more than technical capability. It requires reliability, precision, confidentiality, responsiveness and an uncompromising commitment to quality.
Whether supporting Defence primes, DSTG, government agencies or specialist contractors, Eurotech International remains committed to delivering engineering and manufacturing solutions that strengthen Australia's sovereign industrial capability and contribute to the safety and effectiveness of those who serve our nation.
We are proud of our history, proud of our partnerships, and honoured to continue supporting Australia's Defence industry as a trusted defence fabrication partner into the future.
Send us your drawings and compliance requirements and the Eurotech team will respond within 48 hours.
Request a QuoteContact
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times — we aim to respond within 48 hours. Highett, VIC — serving Melbourne, Victoria and Australia-wide.
Eurotech International is a Melbourne metal fabrication and precision engineering company based in Highett, VIC. Send us your drawings — DXF, DWG, STEP or PDF — and our team will come back with pricing and lead times for CNC laser cutting, folding, welding, machining, forming and finishing. We supply clients across Melbourne, Victoria and Australia-wide, from one-off prototypes to full production runs, all with full material traceability.
Request a Quote
Send us your drawings or a brief description and the Eurotech team will come back with options, pricing and lead times. We typically respond to quote requests within 48 hours.
Careers
Join a family-owned precision metal products manufacturing and engineering company based in Melbourne.
Eurotech International is a family-owned manufacturer based in Highett, Victoria — now in its third generation, and backed by five generations of metalworking heritage. With over 40 years' experience we have earned a reputation for precision, reliability and a commitment to doing things properly — and our people are at the heart of that success. We offer engaging, varied work across defence, infrastructure, mining, renewables, rail, healthcare and many other sectors, supported by state-of-the-art equipment and processes.
We value reliability, attention to detail, a safety-first attitude and a willingness to learn. Whether you are an experienced tradesperson, an engineer, or just starting out, we want people who care about the quality of what they make and enjoy being part of a close-knit team.
We are proud to invest in the next generation of talent — from apprentices learning a trade to university students gaining real-world experience across engineering, software, marketing and business. If you are looking to start an apprenticeship or internship with a growing, forward-thinking company, we would like to hear from you — send us your details and a little about yourself.
Open Positions
The following roles are currently available. Don't see the right one for you? We're always keen to hear from talented people — get in touch and send us your resume.
Build and maintain our websites, e-commerce platform and internal tools across front and back end. Experience with modern web stacks, APIs and integrations preferred.
Manage and grow our online store and product listings — merchandising, content, pricing and order workflows across our product brands and channels.
Drive lead generation and brand growth through SEO, paid campaigns, social media and email. Suited to an all-round digital marketer who can measure and optimise results.
Develop new business and manage client relationships across our fabrication services and product lines. A technical, solutions-focused approach to field and phone sales.
We're always keen to hear from reliable, skilled people. Send us your resume and we'll keep you in mind as roles come up.
Send your resumeOur Services
Eurotech International delivers precision metal fabrication and engineering services from our Highett, VIC facility to manufacturers, OEMs, defence primes and project teams across Melbourne, Victoria and Australia. With 40+ years' experience and full in-house capability from CAD/CAM through to finishing and assembly, we handle the entire production journey under one roof — with full material traceability available on request.
What We Do
Nine in-house services under one roof — from CAD/CAM and cutting to welding, machining, forming and finishing. Click any service for details, capacities and FAQs.
One Supplier. Every Stage.
For engineers and procurement teams managing tight project schedules or regulated supply chains, splitting fabrication across multiple suppliers adds risk — documentation gaps, tolerance drift and unclear accountability. Eurotech manages the complete sequence in-house: engineering review, material procurement with verified mill certificates, cutting, punching, folding, welding, machining, forming, finishing and final assembly. Every job carries a documented quality trail, with certificates of conformance and full material traceability on request.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteService
Precision sheet metal fabrication in Melbourne — laser cutting, folding, welding, machining and finishing under one roof at Highett, with full material traceability available on request.
Eurotech International is a Melbourne sheet metal fabrication specialist. From our Highett factory we take your drawings from raw material through to finished, documented parts — cutting, punching, folding, welding, machining, forming and finishing, all coordinated in-house. With 40+ years' experience and full material traceability available on request, we're the kind of stable, capable partner that regulated and critical programs rely on.
1. Send your drawings — DXF, DWG or STEP with material, quantity and finish; we review and quote.
2. Fabricate under one roof — cut, fold, weld, machine and finish, tracked to your job at every stage.
3. Inspect & deliver — checked against your drawing, documented, and delivered across Melbourne and Australia-wide.
FAQs
It's the process of cutting, forming, folding, welding and finishing flat metal sheet into finished parts and assemblies. At Eurotech we handle the full process in-house at our Highett, Melbourne facility.
Mild and galvanised steel, stainless, aluminium, copper, brass, chromoly and titanium — on sheet up to 4.0 × 2.0 m and to approximately 40 mm across mild steel, stainless and aluminium. Confirm exact parameters at quoting.
Yes — from a single prototype through to ongoing production, with the same programming and quality controls carried through both.
Yes — full material traceability and certificates of conformance on request, with FAIR and PPAP documentation where your project requires it.
Send your DXF, DWG or STEP files through our quote form, email [email protected] or call 1300 038 038. We're at Factory 12, 125–131 Chesterville Rd, Highett VIC 3190.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
Precision stainless steel fabrication in 304 and 316 — laser cutting, folding, welding, polishing and assembly from our Highett facility, with full material traceability available on request.
Eurotech International fabricates stainless steel components, weldments and assemblies for Melbourne's food, beverage, healthcare, architectural and industrial sectors. Stainless rewards experience — it work-hardens, moves with heat and shows every mark — so the difference between an average result and a crisp, hygienic, corrosion-resistant one comes down to process. We cut, fold, weld, polish and assemble stainless in-house, with grade selection guidance, documented welding and finishing matched to your application.
Grade 304 is the workhorse — excellent corrosion resistance for indoor and general outdoor use, food-safe and readily formed and welded. Grade 316 adds molybdenum for superior resistance to chlorides and chemicals, making it the right choice for marine, coastal, pool-side and aggressive industrial environments. Not sure which you need? Tell us the operating environment when you request a quote and we'll recommend the grade.
Stainless can be delivered mill-finish, brushed, linished or polished, with weld dressing and passivation available for hygienic and corrosion-critical applications. We'll match the finish to your specification — from back-of-house functional to front-of-house architectural.
FAQs
304 suits most indoor, food and general outdoor applications. 316 is worth its premium wherever chlorides or chemicals are present — marine, coastal, pools and aggressive industrial settings. We're happy to recommend a grade at quoting if you tell us the environment.
Yes — continuous, crevice-free welds ground and polished for cleanability, with passivation available to restore full corrosion resistance after fabrication. We regularly supply benches, equipment and fit-outs to food, beverage and healthcare clients.
Yes, on request — stainless is sourced with mill certificates, and heat numbers can be recorded against your job with certificates of conformance supplied, plus FAIR/PPAP documentation for regulated programs.
Yes — from a single prototype bench or bracket through to recurring production runs, all fabricated in-house at Highett with the same programming and quality controls.
Send your DXF, DWG or STEP files through our quote form, email [email protected] or call 1300 038 038 — include the grade (or the operating environment) and the finish you're after.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterials
One supplier across ferrous and non-ferrous metals — every material sourced with mill certification, with full traceability available on request. Not sure what to specify? Tell us the application and we'll recommend the metal and grade at quoting.
Our Materials
Every material below is cut, folded, welded, machined and finished in-house at Highett. Click any material for details, grades and FAQs.
Hygienic, corrosion-resistant fabrication for food, beverage, healthcare, architectural and marine-adjacent applications — welded, polished and passivated in-house.
The cost-effective workhorse for brackets, frames, enclosures and structural work — cut, folded and welded to spec, then protected with powder coat, paint or galvanising.
Zinc-coated steel for outdoor and corrosive environments — fabricated with techniques that preserve the coating, or hot-dip galvanised after fabrication for full protection.
Roughly a third the weight of steel and naturally corrosion-resistant — ideal for transport, enclosures and architectural work. We work across 5052, 5083 and 6061 grades.
Conductive, corrosion-resistant and attractive — fabricated for electrical, plumbing, heritage and architectural feature applications.
High strength-to-weight chromium-molybdenum steel for motorsport, aviation and performance applications — welded to documented procedures.
Exceptional strength, light weight and corrosion resistance for demanding aerospace, defence, medical and marine applications — handled with the process control it requires.
FAQs
Usually, yes — through our established supplier network including BlueScope and Surdex Steel. Tell us the grade and standard in your quote request and we'll confirm availability, certification and lead time.
Yes — material is purchased with mill certification, and full traceability from heat number to finished part is available on request, with certificates of conformance and FAIR/PPAP for regulated programs.
Absolutely. Tell us the environment, loads, weight target and finish, and we'll recommend the material and specific grade when we quote — it's part of our design-for-manufacture review.
Yes, we can fabricate from customer-supplied material by arrangement — talk to us about certification and handling requirements when you request a quote.
Send us a drawing and the application, and we'll recommend the right material and grade with your quote.
Request a QuoteMaterial
Cost-effective, strong and versatile — mild steel cutting, folding, welding, machining and finishing from our Highett facility, with full material traceability available on request.
Mild steel is the workhorse of Australian fabrication for good reason: strong, readily available, easy to cut, fold, weld and machine, and the most cost-effective metal we work with. Eurotech International fabricates mild steel components, weldments and assemblies for Melbourne's builders, manufacturers, infrastructure contractors and OEMs — from one-off brackets to structural production runs, all under one roof at Highett.
Bare mild steel rusts, so almost every exposed part needs protection. We finish in-house and through our managed network: powder coating by Dulux and Interpon approved applicators, wet paint systems, zinc plating, or hot-dip galvanising for long-term outdoor exposure. Tell us the operating environment and we'll recommend the right system with your quote.
We work with common Australian structural and sheet grades to suit your drawing, sourced with mill certificates. For structural, infrastructure and regulated work, material traceability, certificates of conformance and welding to documented procedures are available on request.
FAQs
Whenever you need strength and economy and a protective coating is acceptable — brackets, frames, enclosures, guards and structural work. If the part lives in a wet, coastal or hygiene-critical environment, stainless, aluminium or galvanised steel may serve better; we'll advise at quoting.
With the right finish for the environment: powder coating for general indoor/outdoor use, hot-dip galvanising for long-term exposure, zinc plating for smaller parts, or a duplex system (galvanising plus powder coat) where both durability and colour matter.
Laser cutting to approximately 40 mm, guillotining to 20 mm across plate up to 6 m, and press-brake folding matched to your profile and grade — confirmed at quoting.
Yes — typically several times cheaper than stainless for the same part, which is why we suggest specifying stainless only where its corrosion resistance is actually needed. Use our metal weight calculator to compare weights, and we'll price alternatives at quoting.
Yes, on request — mill certificates, heat numbers and batch records tied to your job, with certificates of conformance and FAIR/PPAP for regulated programs.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
Corrosion-protected steel fabrication for outdoor and demanding environments — pre-galvanised sheet work and hot-dip galvanising after fabrication, from our Highett facility.
When steel has to live outdoors — walkways, solar mounting, enclosures, guarding, street furniture — zinc protection is what keeps it in service for decades. Eurotech International fabricates in galvanised steel two ways: working directly with pre-galvanised sheet for lighter-gauge parts, and fabricating in black steel then arranging hot-dip galvanising for structural and heavy-duty work. We'll recommend the right route for your part's gauge, geometry and service life.
Pre-galvanised sheet arrives already zinc-coated — efficient for enclosures, brackets, ducting and light fabrication, with cut edges and welds touched up as needed. Hot-dip galvanising after fabrication immerses the finished weldment in molten zinc, coating every surface, edge and weld — the standard for walkways, platforms, mining guarding and anything structural outdoors. We design for galvanising from the start: venting, drainage and distortion control are handled in the CAD stage.
Where you need long service life and a specified colour, a duplex system — hot-dip galvanising overcoated with powder coat by our Dulux and Interpon approved applicators — delivers both, with each layer extending the life of the other.
FAQs
Lighter-gauge enclosures and brackets usually suit pre-galvanised sheet; structural and outdoor-critical work is better fabricated first and hot-dip galvanised so every edge and weld is coated. We'll recommend the right route at quoting.
Yes — the coating is managed at the weld zone and repaired afterwards with zinc-rich treatment, or the part is fabricated in black steel and galvanised after welding for full coverage.
Yes — a duplex system of galvanising plus powder coat gives the longest service life and your specified colour. Surface preparation matters, which is why it's handled by approved applicators.
Service life depends on coating thickness and environment — decades in most Australian settings. We'll advise what to expect for your application and specify the coating accordingly.
Yes, on request — mill certificates and batch records tied to your job, with certificates of conformance available, including for hot-dip galvanised structural work.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
Lightweight, corrosion-resistant aluminium fabrication — cutting, folding, welding, machining and finishing across 5052, 5083 and 6061 grades from our Highett facility.
At roughly a third the weight of steel and naturally corrosion-resistant, aluminium is the material of choice for transport, marine, electronics and any application where every kilogram counts. It also behaves differently from steel at every stage — bend radii, springback, welding technique and finishing all change — which is why experience matters. Eurotech International fabricates aluminium components and assemblies in-house at Highett, with grade selection guidance built into every quote.
5052 folds beautifully and resists corrosion — the go-to for sheet-metal enclosures and formed parts. 5083 adds strength and outstanding marine corrosion resistance, and welds well — the choice for marine and structural plate work. 6061 is the strong, general-purpose grade that machines cleanly — ideal for machined components, frames and structural extrusion work. Specify the grade if you know it, or tell us the application and we'll recommend one.
Aluminium welding demands the right process, filler and preparation — our qualified welders run TIG and MIG matched to the grade and joint. Finishing options include anodising (standard and hard), powder coating and mill finish, chosen for your environment and look.
FAQs
As a rule of thumb: 5052 for folded sheet-metal parts, 5083 for marine and welded structural work, 6061 for machined and structural components. Tell us the application and we'll confirm the best grade at quoting.
Aluminium is roughly one third the density of steel (2.7 vs 7.85 g/cm³), though a stiffness-matched part may need extra thickness. Our free metal weight calculator compares the same part across materials in seconds.
Yes — TIG and MIG by qualified welders with the correct filler and preparation for the grade. Fine and thin-gauge work can also use our pulsed and laser welding for low-distortion joins.
Anodising gives a hard, integral finish that won't chip and suits machined and marine parts; powder coating offers unlimited colour and covers welds and repairs more forgivingly. We'll recommend one based on environment and appearance.
Yes, on request — mill-certified material with heat/batch records tied to your job, certificates of conformance and FAIR/PPAP where programs require them.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
Conductive, corrosion-resistant and beautiful — copper and brass cutting, forming, joining and finishing for electrical, architectural and heritage applications.
Copper and brass sit in a category of their own: electrically and thermally conductive, naturally antimicrobial, corrosion-resistant and — when the design calls for it — visually striking. Eurotech International fabricates both at Highett, from electrical busbars and earthing components through to architectural features, heritage restoration pieces and decorative metalwork.
Copper's reflectivity and conductivity make it demanding to cut and join — it needs the right equipment settings, tooling and joining method. We select between cutting processes based on gauge and finish, and join by TIG welding, brazing or soldering to suit the application, protecting the surface throughout fabrication so visible faces arrive unmarked.
Left natural, copper and brass develop a patina over time — often exactly the look architects want. Where you'd rather keep the bright finish, we can supply parts polished and clear-coated. Tell us the intent and we'll finish accordingly.
FAQs
Copper for electrical work (busbars, earthing), heat transfer and architectural features; brass for decorative, marine-adjacent and heritage applications where its warm tone and machinability shine.
Naturally, yes — both metals patina with exposure, which many designs embrace. If you want the bright finish preserved, we polish and clear-coat the parts before delivery.
Yes — with the equipment settings and joining methods these metals need. Depending on gauge and finish we cut, punch or saw, and join by TIG, brazing or soldering as the application demands.
We regularly reproduce and repair heritage pieces — bring the original or a sample and we'll match material, profile and finish as closely as the metal allows.
Yes, on request — copper and brass are sourced with certification, and traceability records can be tied to your job like any other material we run.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
High strength-to-weight chromium-molybdenum steel fabrication for motorsport, aviation and performance applications — welded to documented procedures at our Highett facility.
Chromoly — chromium-molybdenum alloy steel, typically 4130 or 4140 — delivers significantly more strength than mild steel at the same weight, which is why it's the standard for roll cages, aircraft components, performance chassis parts and high-stress mechanical components. It's also less forgiving to fabricate: joint preparation, welding technique and heat control all matter. That's exactly the kind of work Eurotech is set up for.
Chromoly is TIG welded by our qualified welders to documented procedures, with joint preparation and heat input controlled to preserve the material's properties — thin-wall tube work in particular rewards a patient, skilled hand. Where a specification calls for post-weld treatment, we'll flag and arrange it as part of the job.
4130 is the tube-and-sheet workhorse — weldable, tough and the motorsport/aviation standard. 4140 carries more carbon for higher strength and hardenability, commonly machined into shafts, spindles and high-load components. We work with both, sourced with certification.
FAQs
Strength for weight. A chromoly structure can match a mild steel one at notably less weight (or be much stronger at the same weight) — the reason it dominates motorsport safety structures and aviation.
Yes — TIG welded by qualified welders to documented procedures with controlled heat input. If your sanctioning body or engineer has specific requirements, send them with your drawings and we'll build to them.
It depends on the alloy, wall thickness and specification — many 4130 tube structures are used as-welded, while some applications call for stress relief or heat treatment. We'll advise per your specification at quoting.
Yes — our CNC turning and milling handles 4140 shafts, spindles, mounts and high-load parts, with material certification and inspection records available on request.
Yes — chromoly is sourced with mill certification, and full traceability with certificates of conformance is available on request, which many builders and certifying engineers now expect.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMaterial
Exceptional strength, light weight and near-total corrosion resistance — titanium fabrication for aerospace, defence, medical and marine applications, handled with the process control it demands.
Titanium is the material you specify when nothing else will do: as strong as many steels at roughly 60% of the weight, essentially immune to seawater and most chemical attack, and biocompatible. It is also unforgiving — contamination during welding embrittles it, and it demands dedicated handling. Eurotech International fabricates titanium at Highett with the discipline the material requires, for the aerospace, defence, medical and marine sectors that specify it.
Above certain temperatures titanium reacts with oxygen and nitrogen, so welding requires full inert-gas shielding — including trailing and back purging — plus scrupulous cleanliness: dedicated tooling, contamination-free handling and clean cutting. Weld quality is visible in the colour of the finished bead, and documented procedures plus inspection back every joint we make.
Grade 2 (commercially pure) offers superb corrosion resistance and formability — the choice for marine and chemical applications. Grade 5 (Ti-6Al-4V) is the aerospace workhorse, roughly twice as strong, used where structural performance rules. Both are sourced with full certification.
FAQs
When weight, corrosion or biocompatibility are decisive — aerospace and defence structures, marine and chemical service, medical equipment. Where they're not, stainless or aluminium usually delivers better value; we'll tell you honestly at quoting.
Yes — TIG with full inert-gas shielding including trailing and back purging, dedicated clean tooling and documented procedures. Contamination control is what separates a sound titanium weld from a brittle one.
Grade 2 for corrosion-driven applications where formability helps; Grade 5 (Ti-6Al-4V) where strength rules. Your engineer's specification governs — send it with your drawings.
Always — titanium work is certification-driven by nature. Material is sourced with full certification, and traceability, certificates of conformance and FAIR/PPAP documentation are available to match your program.
Yes — our CNC machining handles titanium's low thermal conductivity and work-hardening with appropriate speeds, feeds and cooling, in-house at Highett.
Send us a drawing and specification and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteMining & Resources — WA
Precision-fabricated guarding, hoppers, chutes and structural steel for WA mine sites — manufactured in our Melbourne facility with documented quality, and freighted to Perth, the Pilbara and the Goldfields.
Western Australia's mining sector runs on fabricated steel — and site schedules don't wait for local capacity to free up. Eurotech International supplies WA mining operations and their contractors nationally from our Melbourne facility: heavy-duty components engineered for abrasive, high-vibration service, fully documented, packaged for transport and freighted to site or to your Perth laydown.
Capacity and certainty. When WA workshops are booked out or a shutdown package needs guaranteed delivery, we offer production capacity with a documented quality trail — material traceability from certified stock, welding to documented procedures, inspection records and certificates of conformance — plus 40+ years of resource-sector fabrication experience. Repeat orders re-run from stored programs, so replacement parts match the originals exactly.
We package for interstate road and rail freight as standard — protective packing, palletising or crating, and consolidated loads for project deliveries. Parts ship to Perth, direct to site, or on a schedule matched to your shutdown window. Freight terms are quoted up front, so your landed cost is clear before you commit.
FAQs
Yes — we supply Australia-wide, including WA mining operations and their contractors. Parts are packaged for interstate freight and delivered to Perth, to a laydown yard, or direct to site by arrangement.
We quote freight up front with the job — road or rail, palletised or crated, single drops or consolidated project loads — so you see the landed cost before ordering.
Fabrication lead times match our standard indicative windows, plus transit — typically several days by road to Perth. For shutdown packages, tell us the window and we'll schedule production and freight backwards from your required-on-site date.
Yes — send the drawing, or freight us the sample and we'll reverse-engineer it in CAD, fabricate to match and store the program so future replacements are identical.
Material traceability from certified stock, welding to documented procedures, inspection records and certificates of conformance — with FAIR/PPAP available where your quality system requires it.
Send us drawings, a sample or a shutdown package list and the Eurotech team will come back with pricing, lead times and freight options.
Request a QuoteAreas We Serve
Precision metal fabrication minutes from Moorabbin — laser cutting, folding, welding, machining and finishing from our Chesterville Road facility on the Highett–Moorabbin border.
If you're in Moorabbin and searching for a metal fabricator, we're closer than you think. Eurotech International's workshop sits on Chesterville Road, right on the Highett–Moorabbin border — a few minutes from the Moorabbin industrial precinct, Moorabbin Airport and Kingston Road. That means quick drop-offs for drawings and samples, easy pickups, and fast local delivery for finished parts.
We support Moorabbin's manufacturers, trades and engineering businesses with the full fabrication sequence under one roof: CNC laser cutting, turret punching, folding and press braking, MIG/TIG welding, machining, forming and spinning, and finishing with powder coating by Dulux and Interpon approved applicators. From a single bracket to recurring production runs, everything is quoted, made and quality-checked in-house.
Working with a fabricator ten minutes away means you can drop in a sample part, look at a first article before the run starts, and collect urgent jobs the day they're finished. For Moorabbin workshops and OEMs running tight schedules, that proximity — backed by 40+ years' fabrication experience — takes real risk out of the supply chain.
FAQs
Yes — Moorabbin is on our doorstep. Our facility is on Chesterville Road at the Highett–Moorabbin border, and Moorabbin businesses make up a big part of our local work.
Absolutely. We're a few minutes from the Moorabbin industrial precinct — drop in Monday to Friday, 9:00am–4:00pm, or send DXF, DWG or STEP files through our quote form.
The full sequence in-house: laser cutting, turret punching, folding, welding, machining, forming and spinning, and finishing with powder coating — plus assembly, packaging and local delivery.
Indicative lead times are 3–4 days for laser cutting only and 7–10 days for cutting plus folding, confirmed at quoting. Being local, urgent pickups on the day of completion are often possible.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteAreas We Serve
Precision metal fabrication five minutes from Cheltenham — laser cutting, folding, welding, machining and finishing from our Highett facility, just up Chesterville Road.
Cheltenham businesses don't have to send fabrication work across town. Eurotech International's workshop is on Chesterville Road in Highett — effectively next door, a five-minute drive from the Cheltenham industrial area and the Southland precinct. For local trades, shopfitters, equipment builders and manufacturers, that means same-suburb convenience with full-factory capability.
Everything happens under one roof: CNC laser cutting and turret punching, folding and press braking, MIG/TIG welding, machining, forming and spinning, and finishing with powder coating applied by Dulux and Interpon approved applicators. We handle one-off brackets and repairs for local trades just as readily as recurring production runs for manufacturers.
With Southland and the Cheltenham retail strip nearby, we regularly support shopfitters and builders with counters, frames, brackets and architectural metalwork — alongside our production work for industrial clients. Drop in with a drawing, a sketch or the actual part you need matched.
FAQs
Yes — Cheltenham is one of our closest service areas. Our Highett facility is around five minutes away, so drop-offs, pickups and site measures are easy.
Yes. One-off brackets, repairs, modified parts and short runs are all welcome alongside our production work — send a photo or sketch if you don't have a drawing.
We do — counters, frames, feature screens, balustrade components and custom architectural pieces, finished with powder coating in your specified colour.
Send DXF, DWG, STEP or PDF drawings via our quote form, email [email protected], call 1300 038 038, or drop in Monday–Friday 9:00am–4:00pm.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteAreas We Serve
Precision metal fabrication just up the road from Mentone — laser cutting, folding, welding, machining and finishing from our Highett workshop, under ten minutes away.
For Mentone builders, trades, schools and businesses, Eurotech International is the nearest full-capability metal fabricator — our Highett factory is under ten minutes away via Warrigal or Balcombe Road. Rather than posting drawings to a workshop across town, you can drop in, talk the job through and collect it when it's done.
From custom brackets, frames, gates and balustrade components through to equipment guards, enclosures and production parts — cut, folded, welded and finished in-house. Powder coating is applied by Dulux and Interpon approved applicators, so exterior work by the bay gets a finish that lasts.
Being close to the bay, Mentone projects often call for corrosion-smart choices — galvanised steel, marine-grade 316 stainless or aluminium. We'll recommend the right material and finish for salt-air exposure as part of your quote, backed by mill-certified supply.
FAQs
Yes — Mentone is squarely in our local service area, under ten minutes from our Highett workshop, with drop-offs, pickups and delivery all easy.
For salt-air exposure we typically recommend 316 stainless, aluminium or hot-dip galvanised steel with a quality powder coat — we'll advise the right combination for your project at quoting.
Yes — we fabricate custom gates, balustrade components, brackets and architectural pieces for builders and homeowners, finished in your choice of powder-coat colour.
Send drawings or photos via our quote form, email [email protected] or call 1300 038 038 — or drop in weekdays 9:00am–4:00pm.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteAreas We Serve
Precision metal fabrication for Clayton's manufacturing and innovation precinct — prototyping through to production, fifteen minutes away in Highett.
Clayton is one of Melbourne's densest concentrations of manufacturers, medical and scientific equipment makers, and research organisations around the Monash precinct. Eurotech International supports that community from fifteen minutes away in Highett — with the CAD/CAM, fabrication and finishing capability to take a design from first prototype to repeat production without changing suppliers.
We work from your DXF, DWG or STEP files, review designs for manufacturability, and turn prototypes around fast — then carry the same programs and quality controls through to production runs. For Clayton's R&D-heavy businesses, that continuity is the point: the part you validated is the part you get at volume.
Enclosures, chassis, brackets, guards and welded assemblies — laser cut, punched, folded, welded, machined and finished in-house, with material traceability and certificates of conformance available on request for medical, scientific and regulated work.
FAQs
Yes — manufacturers, equipment builders and research-linked businesses around the Monash precinct are a natural fit for our prototype-to-production capability, fifteen minutes away.
Yes — hygienic stainless fabrication, precision enclosures and documented quality, with material traceability and certificates of conformance available on request.
Indicative lead time for laser cutting is 3–4 days, and simple folded prototypes typically 7–10 days — confirmed at quoting, with rush options on request.
DXF, DWG or STEP is ideal; PDFs work for quoting. Send them through our quote form and we'll respond within 48 hours.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteAreas We Serve
Precision metal fabrication for Melbourne's largest manufacturing precinct — overflow capacity, specialist processes and full production support, 25 minutes from Dandenong via the Dingley Bypass.
Dandenong and Dandenong South make up Melbourne's biggest manufacturing heartland — and even well-equipped factories there run out of capacity, or need a process they don't have in-house. Eurotech International supports Dandenong manufacturers from Highett, about 25 minutes up the Dingley Bypass, with scheduled delivery runs that make distance a non-issue.
Many of our Dandenong relationships start as overflow — a full order book, a machine down, or a job needing turret punching, metal spinning or an approved powder-coat warranty. We slot in as a reliable second source: your drawings, our capacity, one accountable supplier, with quality documentation to match your system.
For OEMs and equipment builders we run recurring production — laser cutting, folding, welding, machining and finishing under one roof, with material traceability on request, scheduled releases and warehousing by arrangement so parts arrive as your line needs them.
FAQs
Yes — we run regular deliveries to Dandenong and Dandenong South, and for production programs we can schedule releases so parts arrive when your line needs them.
Yes — we regularly run second-source and overflow work for manufacturers. Send your drawings and volumes and we'll confirm capacity and lead times within 48 hours.
Yes — certificates of conformance, material traceability, FAIR/PPAP and inspection records are available on request under our ISO 9001-aligned QMS.
Capability and capacity. If your local options are booked out or don't run a process you need — turret punching, spinning, approved powder-coat warranties — we're 25 minutes away with delivery included.
Send us a drawing or brief and the Eurotech team will come back with options, pricing and lead times.
Request a QuoteEngineering & Fabrication Insights
Practical, no-fluff articles on precision metal fabrication, sheet metal engineering, CAD/CAM and materials — written for the engineers, procurement teams and project managers we work with every day.
Free Engineering Tools
Quick estimates for the numbers engineers ask us about most. Indicative only — send your drawings for a firm quote.
Based on nominal densities. Actual weights vary with grade, tolerance and finish.
Request a QuoteNominal densities; ends and corner radii ignored. Indicative only.
Request a QuoteBend angle is the angle through which the sheet is formed (90° for a right-angle bend). K-factor is typically 0.33–0.45 for steel; leave the default if unsure.
Flat length = leg A + leg B − BD (per bend). Use BA when building a flat pattern from the neutral axis.
Latest
Written by people who do this work every day. Expect specific, practical content — not marketing fluff.
Send us your drawings, call 1300 038 038, or email [email protected] — we'll give you a straight, informed response.
Request a QuoteFree Tool
Estimate the weight of a sheet, plate, bar or tube in seconds — choose a material and shape, enter the dimensions, and we'll do the maths.
Based on nominal densities. Indicative only — actual weights vary with grade, tolerance and finish. Send your drawings for a firm quote.
Request a QuoteIndustry
FAQs
Our Products
Designed and manufactured by Eurotech International in Highett, VIC — from smart city infrastructure to exhaust products and custom fabrication, backed by 40+ years of precision manufacturing.
Something Custom?
Most of what we build is made to order. Send us a drawing or an idea and we'll fabricate to your specification.
Portfolio
Detailed case studies of recent Eurotech work are being prepared. In the meantime, explore our services or send us a drawing — we'd be glad to show you what we can do.
We're compiling detailed case studies across defence, infrastructure, mining, transport and more — what we delivered, the materials and finishes involved and the capabilities used.
Gallery
Legal
The terms that apply to your use of the Eurotech International website.
Last updated: 30 July 2026
This website, euro.net.au, is operated by Eurotech International Pty Ltd (ABN 73 165 310 385) of Factory 12, 125–131 Chesterville Rd, Highett VIC 3190 ("Eurotech", "we", "us"). By accessing or using this website you agree to these Terms of Use. Our handling of personal information is described separately in our Privacy Policy.
All content on this website — including text, images, graphics, logos, videos, product designs, documents and downloads — is owned by or licensed to Eurotech and is protected by copyright, trade mark and other intellectual property laws. Our product ranges, including the Smart Solar and EXO product families, are Eurotech designs. You may view this website and print or save extracts for your personal use or to evaluate working with us. You may not otherwise reproduce, distribute, modify or commercially use any content, or use Eurotech's name or logos, without our prior written permission. Third-party names, logos and footage that appear on this website belong to their respective owners.
The information on this website is general in nature. Capacities, dimensions, thicknesses, tolerances, materials, finishes and response-time indications describe typical envelopes only — actual figures vary with material, geometry and job requirements and are confirmed during quoting. Nothing on this website is an offer capable of acceptance, and website content is not technical or engineering advice for a specific application. Please confirm suitability for your project with our team.
Any supply of goods or services by Eurotech is governed by the written quotation and any terms agreed for that transaction, not by this website. If there is any inconsistency between this website and a quotation or agreed supply terms, the quotation or agreed terms prevail.
You must not misuse this website. That includes using it unlawfully, attempting to gain unauthorised access to any system or data, interfering with its operation, harvesting or scraping content or data by automated means, or submitting false or misleading information through our forms.
This website may link to or display content from third-party sites and services, including customer reviews and partner websites. These are provided for convenience — we do not control them and are not responsible for their content, and a link is not an endorsement.
To the maximum extent permitted by law, Eurotech excludes liability for any loss or damage arising from your use of, or reliance on, this website or its content. Nothing in these terms excludes, restricts or modifies any right or remedy you have under the Australian Consumer Law or any other law that cannot be excluded. Where our liability cannot be excluded but can be limited, it is limited to the resupply of the relevant information or services.
We may update this website and these Terms of Use from time to time. The version published on this page applies from its "last updated" date, and your continued use of the website constitutes acceptance of the current version.
These terms are governed by the laws of Victoria, Australia, and you submit to the non-exclusive jurisdiction of the courts of Victoria.
Questions about these terms: [email protected] or 1300 038 038 (Mon–Fri, 9:00am–4:00pm).
Legal
How Eurotech International collects, uses and protects your personal information.
Last updated: 20 July 2026
Eurotech International Pty Ltd (ABN 73 165 310 385) of Factory 12, 125–131 Chesterville Rd, Highett VIC 3190 ("Eurotech", "we", "us") respects your privacy. This policy explains what personal information we collect through this website, how we use it, and the choices you have. We handle personal information in line with the Australian Privacy Principles in the Privacy Act 1988 (Cth).
Information you give us. When you use our contact or quote forms, email us, or call, we collect the details you provide — typically your name, company, phone number, email address and the information in your message, such as project details, drawings and specifications. If you apply for a role with us, we collect the information in your application and resume.
Information collected automatically. We use Google Analytics (via Google Tag Manager) to understand how visitors use the site — pages viewed, approximate location, device and browser type, and how you found us. This is collected using cookies and is aggregated; we don't use it to personally identify you. Our forms are protected by Cloudflare Turnstile, which analyses technical signals from your browser to tell people apart from automated bots.
We use your information to respond to your enquiry, prepare quotes, deliver our products and services, keep business records, and improve our website. We may contact you about your enquiry and, where you would reasonably expect it, about our services — you can opt out of any marketing at any time by replying or contacting us. We do not sell personal information.
Your information is held securely with trusted service providers we use to run our business: our customer-relationship system, our email and document systems (Microsoft 365), our website host (Cloudflare) and our analytics provider (Google). Some of these providers store data on servers located overseas, including in the United States. We only share personal information with people and providers who need it to help us serve you, or where the law requires it.
Cookies are small files stored by your browser. This site uses them for the analytics described above. You can block or delete cookies in your browser settings; the site will still work.
We keep personal information only as long as it's needed for the purposes above or as the law requires, and we take reasonable steps to protect it from misuse, loss and unauthorised access.
You can ask us at any time to see or correct the personal information we hold about you, or raise a privacy concern, by emailing [email protected] or calling 1300 038 038. We'll respond promptly. If you're not satisfied with our response, you can contact the Office of the Australian Information Commissioner (oaic.gov.au).
We may update this policy from time to time — the latest version will always be on this page.